Products
Products by Category
|
Economy Metal Halide 250w System
|
Economy Metal Halide 250w System
|
|
Item #: 457631708
Price: 196.00
|
| The Greenhouse 250W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made of a 95% reflective aluminum with a heavy duty reinforced spine for direct or chain mounting. The reflector is designed to produce a direct light. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 4 individual bends for ultra even light distribution without hot spots! This is a reflector only therefore you cannot add glass, fans or fittings. This is a great reflector option if no additional accessories are needed. The reflector is high quality and highly reflective. All standard bulbs can be used with this reflector Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 250W Metal Halide include: 250 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 250 watt Metal Halide bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Metal Halide 250w System
|
|
Item #: 457631693
Price: 216.00
|
| The Greenhouse 250W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made from lightweight heavy duty sheet metal, powder-coated white on both sides to resist rust. A 95% reflective aluminum reflector is mounted internally. The reflector is designed to produce a direct light that will increase the light output generated from your hood assembly. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 12 individual bends in the top for ultra even light distribution without hot spots! Notice that the spectral insert conforms precisely with the bends in the reflector. Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 250W Metal Halide include: 250 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 250 watt Metal Halide bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Economy Metal Halide 175w System
|
|
Item #: 457631710
Price: 180.00
|
| The Greenhouse 175W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made of a 95% reflective aluminum with a heavy duty reinforced spine for direct or chain mounting. The reflector is designed to produce a direct light. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 4 individual bends for ultra even light distribution without hot spots! This is a reflector only therefore you cannot add glass, fans or fittings. This is a great reflector option if no additional accessories are needed. The reflector is high quality and highly reflective. All standard bulbs can be used with this reflector Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 175W Metal Halide include: 175 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 175 watt Metal Halide bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Economy Metal Halide 400w System
|
|
Item #: 457631702
Price: 208.00
|
| The Greenhouse 400W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. Compare this to other manufacturers two in one ballasts for almost $200 more. Quite simply the most value for your growing needs. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made of a 95% reflective aluminum with a heavy duty reinforced spine for direct or chain mounting. The reflector is designed to produce a direct light. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 4 individual bends for ultra even light distribution without hot spots! This is a reflector only therefore you cannot add glass, fans or fittings. This is a great reflector option if no additional accessories are needed. The reflector is high quality and highly reflective. All standard bulbs can be used with this reflector Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 400W Metal Halide include: 400 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 400 watt Metal Halide bulb. Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. The High Pressure Sodium bulb has a strong red spectrum, which promotes fruiting and flowering and increases production and yield. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Economy Metal Halide 1000w System
|
|
Item #: 457631701
Price: 241.00
|
| The Greenhouse 1000W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made of a 95% reflective aluminum with a heavy duty reinforced spine for direct or chain mounting. The reflector is designed to produce a direct light. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 4 individual bends for ultra even light distribution without hot spots! This is a reflector only therefore you cannot add glass, fans or fittings. This is a great reflector option if no additional accessories are needed. The reflector is high quality and highly reflective. All standard bulbs can be used with this reflector Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 1000W Metal Halide include: 1000 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 1000 watt Metal Halide bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Metal Halide 250w Ballast only
|
|
Item #: 457689143
Price: 144.00
|
| The ballast is heavy duty to resist damage. This cooler running, heavy duty, commercial quality ballast is designed to last beyond the 5 year system warranty. The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Extruded Aluminum Heat Sink Housing for Maximum Cooling UL & CUL listed and approved for safety Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. |
|
Economy High Pressure Sodium 250w System
|
|
Item #: 457631707
Price: 211.00
|
| The Greenhouse 250W High Pressure Sodium Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made of a 95% reflective aluminum with a heavy duty reinforced spine for direct or chain mounting. The reflector is designed to produce a direct light. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 4 individual bends for ultra even light distribution without hot spots! This is a reflector only therefore you cannot add glass, fans or fittings. This is a great reflector option if no additional accessories are needed. The reflector is high quality and highly reflective. All standard bulbs can be used with this reflector Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 250W High Pressure Sodium include: 250 watt HPS ballast 10’ Socket Assembly Light Hood Reflector One lamp - 250 watt High Pressure Sodium bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The High Pressure Sodium bulb has a strong red spectrum, which promotes fruiting and flowering and increases production and yield. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Metal Halide 175w System
|
|
Item #: 457631695
Price: 200.00
|
| The Greenhouse 175W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made from lightweight heavy duty sheet metal, powder-coated white on both sides to resist rust. A 95% reflective aluminum reflector is mounted internally. The reflector is designed to produce a direct light that will increase the light output generated from your hood assembly. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 12 individual bends in the top for ultra even light distribution without hot spots! Notice that the spectral insert conforms precisely with the bends in the reflector. Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 175W Metal Halide include: 175 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 175 watt Metal Halide bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Metal Halide 400w System
|
|
Item #: 457689138
Price: 228.00
|
| The Greenhouse 400W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. Compare this to other manufacturers two in one ballasts for almost $200 more. Quite simply the most value for your growing needs. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made from lightweight heavy duty sheet metal, powder-coated white on both sides to resist rust. A 95% reflective aluminum reflector is mounted internally. The reflector is designed to produce a direct light that will increase the light output generated from your hood assembly. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 12 individual bends in the top for ultra even light distribution without hot spots! Notice that the spectral insert conforms precisely with the bends in the reflector. Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 400W Metal Halide include: 400 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 400 watt Metal Halide bulb. Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. The High Pressure Sodium bulb has a strong red spectrum, which promotes fruiting and flowering and increases production and yield. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
Metal Halide 1000w System
|
|
Item #: 457631688
Price: 261.00
|
| The Greenhouse 1000W Metal Halide Grow Light is complete and ready to help you grow. Just order, unpack, plug in and start growing. 100% American Made. Note: When comparing prices on remote ballasts, please be sure to ask the country of origin of the ballasts, capacitors and igniters. Our 100% U.S. made systems are the best priced, best value on the market. When you can purchase a U.S. remote ballast system for the same price as the imported ballast system, your buying decision should be simple. The entire system is heavy duty to resist damage. This system is designed for longevity. This cooler running, more heavy duty, commercial quality system is designed to last beyond the 5 year system warranty. Reflector The reflector is made from lightweight heavy duty sheet metal, powder-coated white on both sides to resist rust. A 95% reflective aluminum reflector is mounted internally. The reflector is designed to produce a direct light that will increase the light output generated from your hood assembly. The dimensions are approximately 16 inches long 19 inches wide and 10 inches deep. The horizontal shaped reflector allows for a wide reflection of light to the plants and good downward reflection. The reflector has 12 individual bends in the top for ultra even light distribution without hot spots! Notice that the spectral insert conforms precisely with the bends in the reflector. Ballast The quieter noise reduced, industrial grade ballast is long lasting and trouble free. The cooler running extruded aluminum housing is designed to dissipate heat at an improved rate. Compare to sheet metal housings that get very hot to the touch and trap heat around the ballast that cause internal component failure. It is quieter, noise reduced ballast. The ballast utilizes a high tech heat sink, which doubles as the component enclosure housing. It is ETL listed for safe operation, rated for damp location, comes with a 6-foot power cord and has a 10-foot lamp cord. The heat-sink case or housing that holds the components is made from extruded aluminum. In the extrusion process fins are made. These fins help to transfer the heat from the transformer to the air without the need for air vents. You will find fins like these on high quality stereo gear and used there for the same purpose. You should also note that these ballasts have not been painted. The painting of the heat sink case or housing inhibits the heat transfer process dramatically. Other manufactures that paint their air vent free ballasts for cosmetic reasons run the risks of baking the components. Electrical components work better when they run cool. We will never paint our ballasts. Six feet of heavy-duty power cord and 10 feet of heavy-duty lamp cord are standard. The lamp cord comes complete with a mogul socket and assembly to attach to all reflectors. The socket is rated at 5kv and is universal. Socket The 10’ socket cord is designed to fit on any hood system. It is a versatile unit that gives you the freedom to remove the socket assembly and install on any reflector or hood if needed. Greenhouse 1000W Metal Halide include: 1000 watt MH ballast 10’ Socket Assembly Light Hood Reflector One lamp - 1000 watt Metal Halide bulb Hanging Kit Additional information: Extruded Aluminum Heat Sink Housing for Maximum Cooling American made 100° Celsius capacitor. 6 foot grounded power cord. 10-foot detachable lamp cord with 5KV socket assembly In line fuse for surge protection. 5 KV horizontal socket assembly. UL & CUL listed and approved for safety - glass required on MH horizontal fixtures. All systems wired for 120 volt, unless specified otherwise. Reflector – 95% reflective aluminum for maximum reflectivity Full 5 year warranty. 1 year on bulb. Orders are processed and shipped within 2-3 business days and UPS tracking numbers are provided to your email address. Shipping and Handling Information: Shipping and Handling is calculated using standard UPS rates plus a small handling fee. Enter in your Shipping information (State and Zip) after you checkout to calculate the exact shipping rate (Note that your order will not be placed until you confirm the order on the confirmation page after you have entered your shipping and billing information.) Packaging: In an effort to keep costs down, our packaging does not have any labels or retail characteristics. Our UPS boxes are also free of any markings and labels so we can pass along our packaging cost savings to our customers. Other Information: The Metal Halide bulb has a strong blue spectrum, which promotes short stocky vegetative growth. High Pressure Sodium lamps are used in greenhouses to elevate the red, orange and yellow electromagnetic wavelengths hitting the plant. This (along with shorter photo-periods) signals the plant to start producing bloom hormones. Increased red, orange and yellow wavelengths can produce higher yields and more abundant blooms and fruiting sites when quality plant foods and bloom leaf sprays are used. Indoor gardeners, lacking the Sun, may find that HPS lamps do not supply the necessary amount of blue light to keep plants healthy. Blue light drives photosynthesis, translocates sugars and keeps the immune system working properly. Those growing areas using HPS lamps exclusively in the bloom stages of growth may experience adverse vertical stretching and blooms located only at the top of the plant. It is suggested to burn a Metal Halide lamp along side of the HPS lamp to increase sugar production and horizontal growth. Increased insect attack in the final stages of HPS only bloom growth may also be experienced. |
|
|
