Omnitron Flexpoint 10t 2 Transceiver 10base T 10base 2 Coax Bnc Rj 45

Omnitron FlexPoint 10T/2 - Transceiver - 10Base-T, 10Base-2 (coax) - BNC - RJ-45

Item #: 458191009
Price: 173.32

The FlexPoint 10T/2 is a member of the modular FlexPoint converter product family. The FlexPoint product family supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media.The FlexPoint 10T/2 is a 10Base-T to 10Base-2 converter that converts between twisted pair (UTP) and coax LANs and joins their collision domains. The FlexPoint 10T/2 facilitates the connection of a coax segment to a 10Base-T hub. When using a pair of FlexPoint 10T/2 converters back to back, they connect between two 10Base-T hubs via coax. On the UTP side, the FlexPoint 10T/2 uses a modular EIA/ TIA 568 RJ45 connector that supports categories 3, 4 or 5 wiring and connects to distances up to 100 m (328 ft.). The FlexPoint 10T/2 detects and corrects wiring polarity reversals, and features a crossover switch that facilitates a straight-through cable connection to a workstation or a hub and eliminates the need for a crossed cable. On the coax side, the FlexPoint 10T/2 utilizes a BNC connector and supports a 50 ohm cable and distances of up to 185 m (606 ft.). Per IEEE 802.3 standard, up to 30 workstations can be attached to the coax segment. The FlexPoint 10T/2 features a convenient and cost-effective cable termination via a termination switch and a built-in termination element.

Omnitron FlexPoint 10/100 - Transceiver - 10Base-T, 100Base-FX, 100Base-TX - RJ-

Item #: 459524961
Price: 443.27

The FlexPoint 10/100 rate converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types. This rate converter features one 10/100 auto-sensing UTP port that adjusts its speed to the speed of the attached device. In addition, the FlexPoint 10/100 automatically negotiates and provides full-duplex or half-duplex capability to maximize network bandwidth. These features allow a seamless migration path to newer technologies. An override switch provides total manual control over the 10/100 operation of the UTP port and the half/full duplex operation of both the fiber and UTP port.The fiber port operates at 1300 nm and features SC or ST connectors. Multimode fiber models support distances of up to 2 km, and single-mode fiber models support distances of up to 58 km. Using its store-and-forward technology with 1-Mbyte buffer memory, the FlexPoint 10/100 supports a full wire-speed of 148, 800 64-byte packets per second simultaneously in both directions. Each port of the FlexPoint 10/100 is capable of MAC address learning and aging with support for up to 1, 024 MAC addresses, as well as packet filtering and forwarding. The FlexPoint checks all packets and discards illegal or corrupted packets thus providing fragment-free packet forwarding and enhancing the overall network performance. It features a crossover switch that facilitates a straight-through cable connection to a workstation or hub and eliminates the need for a crossed cable. The FlexPoint 10/100 provides diagnostic data through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, the modes of operation (10/100 and half or full duplex), the detection of devices and data being received by the fiber and UTP ports. The FlexPoint offers several mounting options. It can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit rack-mounting shelf or in a 14-unit FlexPoint Powered Chassis.

Omnitron FlexPoint 10/100 - Transceiver - 10Base-T, 100Base-FX, 100Base-TX - RJ-

Item #: 458191012
Price: 275.61

Transition - Transceiver - 10Base-T, 10Base-5 (coax), AUI - RJ-45 - 15 pin D-Sub

Item #: 458216046
Price: 53.05

The E-TBT-MC04 transceiver is a media access unit (MAU) that connects the AUI port of data terminal equipment, repeaters, or other network devices either directly or through an AUI cable to an Ethernet 10BASE-T device. The Ethernet device is connected to the transceiver through an unshielded or shielded twisted-pair copper cable with RJ-45 connector ends.

Omnitron FlexPoint T1/E1 - Transceiver - fiber optic - external - up to 3.1 mile

Item #: 458989800
Price: 559.51

Omnitron's FlexPoint media converters provide conversion between different cabling types as your wiring needs change. The same unit can be used stand-alone, wall-mounted, rack-mounted, or installed in the power-redundant Powered Chassis. You can mix and match various FlexPoint converters for any size network to deliver reliability and flexibility! The FlexPoint T1/E1 connects T1 and E1 devices, such as PBXs, CSUs and routers, via multimode or single-mode fiber. Designed to extend the standard T1/E1 twisted pair and coax network distances over fiber, this converter provides protection from environmental noise and effectively increases high-speed network reliability. The converter provides support for line codes such as AMI, B8ZS and HDB3. The T1/E1 line codes and line lengths are configured using easy to arrange dip switches located on the FlexPoint T1/E1 media converter. The fiber port operates at 1300 nm and features SC, or ST connectors. Multimode fiber models support distances of up to 5 km, and single-mode fiber models support distances of up to 58 km. A crossover switch on the RJ45/RJ48 port makes it simple to connect the FlexPoint T1/E1 converter to DTE and DCE equipment like PBXs or CSUs and eliminates the need for crossover and custom cables to connect devices together. Diagnostic features include local loop-back, remote loop-back and all 1's insertion (AIS) mode for the copper or fiber segments. The local loop-back mode allows the installer to validate connectivity to local T1/E1 lines, while the remote loop-back feature allows the installer to validate the entire fiber segment from one unit without having to make adjustments on both ends. The FlexPoint offers several mounting options. It can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit rack-mounting shelf or in the 14-unit FlexPoint Powered Chassis which is available with redundant 110/220V AC or 48V DC power supplies.

Omnitron FlexPoint T1/E1 - Transceiver - fiber optic - external - up to 3.1 mile

Item #: 458824293
Price: 559.51

Omnitron FlexPoint 232 - Transceiver - fiber optic, serial RS-232 - external - u

Item #: 458191657
Price: 178.11

Omnitron's FlexPoint media converters provide conversion between different cabling types as your wiring needs change. The same unit can be used stand-alone, wall-mounted, rack-mounted, or installed in power-redundant Powered Chassis. You can mix and match various FlexPoint converters for any size network to deliver reliability and flexibility! The FlexPoint 232 fiber converter/extender is a member of the modular FlexPoint product line. The FlexPoint product line provides an extensive range of networking and communication connectivity options across different protocols and media types. The FlexPoint 232 is a serial RS-232 to fiber converter, automatically supporting speeds of up to 115, 200 baud providing the flexibility to facilitate a wide range of needs and applications. This converter extends the distance of the connection to 5 km (3.1 mi.) using multimode fiber and to 58 km (36 mi.) using single-mode fiber. This wide range of distance support provides solutions to the connectivity needs of short haul as well as long haul fiber users. Most distances are available with ST and SC fiber connectors. This feature makes the FlexPoint 232 easy to connect in any applications. The FlexPoint 232 supports both half-duplex and full-duplex modes of operation. Flow control through the FlexPoint 232 can be done via software using the XON / XOFF protocol or via the supported RTS, CTS, DCD, DTR and DCR flow control signals. These features allow the easy interface to any RS-232 DTE or DCE device. Most users who have connected RS-232 devices have experienced the frustration of having to select the appropriate cable for their application. The FlexPoint 232 is designed to be easily set to connect to a DTE or DCE device. This feature includes data lines (TxD and RxD) as well as flow control signals (RTS, CTS, DCD, DTR and DCR) direction configuration. This powerful feature allows the use of straight-through cabling all across the enterprise and makes installation consistent, easy and straight forward. The FlexPoint 232's diagnostic features make it easy to install and configure. The fiber link connection can be verified without actual data activity. The remote loop-back capability allows testing of the fiber link pair by controlling the far-end converter and allowing the installer to test both ends of the fiber from one physical location. The LEDs provide informative status information which makes the installation and status monitoring easy and intuitive. The FlexPoint offers several mounting options. It can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit rack-mounting shelf or in a 14-unit FlexPoint Powered Chassis.

Canary CCM 1202-SC - Transceiver - 10Base-T, 10Base-FL - RJ-45 - SC - plug-in mo

Item #: 458190763
Price: 142.95

Canary rack mountable chassis not only provide a solution for your conversion needs, but also offer a possibility to grow with the network, be it new media or a strategic migration from 10 Mbps networks to Fast Ethernet or ATM. You can fill your chassis with different network modules to suit your own needs.

Omnitron FlexPoint 100FF - Transceiver - 100Base-SX, 100Base-LX - ST multi-mode

Item #: 458989644
Price: 861.86

The FlexPoint 100FF Single-Mode to Multimode Fiber Converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types. The FlexPoint 100FF Single-Mode to Multimode Fiber Converter provides a cost-effective solution to extend network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.The FlexPoint provides diagnostic data through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power and the detection of devices attached to the fiber ports. The FlexPoint offers several mounting options. It can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit rack-mounting shelf or be installed in a rack-mountable, high-density, 14-unit, power-redundant chassis.

Omnitron FlexPoint Gx - Transceiver - 1000Base-SX, 1000Base-T - rack-mountable -

Item #: 458824289
Price: 385.75

The FlexPoint Gx converter is an IEEE 802.3ab compliant Gigabit Ethernet 1000Base-T unshielded twisted pair (UTP) to 1000Base-Sx or 1000Base-Lx fiber converter. It is a member of the modular FlexPoint product line that provides a wide range of connectivity options across different network and media types. The FlexPoint Gx features Auto-Negotiation, which allows auto-adapting to the full/half duplex and flow control services supported by the device connected to its UTP port. User-selectable override options are provided to set to the desired mode. The FlexPoint Gx operates in full-duplex providing an effective two-Gigabit data rate or in half-duplex at one Gigabit. This feature maximizes the throughput when connecting to high bandwidth full-duplex devices such as servers or switches.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Next

Home