Cable Products

StarTech.com Coax Super Thin Low Profile SVGA Monitor Cable - Display cable - HD

Item #: 458213483
Price: 14.30

StarTech.com's premium VGA Video Extension Cables are designed to provide the highest video quality. These superthin lightweight cables come with slim low profile HDDB15 connectors, and are perfect for carrying in your laptop bag, or to minimize cable clutter in desktop environments. They eliminate the annoying "ghosting" and fuzzy images inherent with non-coaxial cables.

Belkin Retractable Television Cable for iPod - Video / audio cable - mini-phone

Item #: 459433749
Price: 12.07

Marketing description is not available.

Cisco Cable High-Speed WAN Interface Card - Cable modem - plug-in module - HWIC

Item #: 458216463
Price: 391.31

The new Cable HWICs are designed to comply with DOCSIS 2.0, Euro-DOCSIS 2.0, and J-DOCSIS 2.0 specifications and provide single-port cable modem connectivity for the Cisco modular integrated services routers and the Cisco IAD2430 series routers to the cable operator WAN. These cable HWICs, combined with the Cisco 2800 and 3800 Series Integrated Services Routers; Cisco 1841 Integrated Services Router; and Cisco IAD2430 Series provide high-speed digital data transmission between customer premises equipment (CPE) and a central office. This enables cable service providers and resellers to offer additional services by supporting features for business-class security, voice integration, differentiated classes of service (CoS), and managed network access with Cisco IOS Software. These value-added features, along with the manageability and reliability of Cisco IOS Software technology, provide the mission-critical networking that businesses require.

Monster Cable Twist Crimp Toolless Speaker Cable Connectors Angled Gold Pin AGPT

Item #: 459432372
Price: 13.02

Monster Cable Products is the world's leading manufacturer of high performance cables that connect audio/video components for home, car and professional use as well as computers and computer games. Monster Cable is an indispensable component for music lovers, audiophiles, recording studios, sound professionals, musicians, custom-installers and home theater enthusiasts.PRODUCT FEATURES:Special LockNotch design that will not pull out of push - pin terminal connections;Patented 60� angle on regular size reduces stress between pin and cable;OmniFlex connector allows bending and flexing in all directions for easy installation;Ideal for hard-to-get-to connections on back of amps and receivers.

General Wire P-MR-A Mini-Rooter Basic Unit with 50' x 3/8" Cable and Power Cable Feed

Item #: 455378747
Price: 589.77
Retail price: ~~690.60~~

General Wire P-MR-A Mini-Rooter Basic Unit with 50' x 3/8" Cable and Power Cable Feed The General Wire P-MR-A Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 50' x 3/8" cable (50EM2), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-A Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-A Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable.

General Wire P-MR-B Mini-Rooter Basic Unit with 75' x 3/8" cable and Power Cable Feed

Item #: 455378748
Price: 621.16
Retail price: ~~727.35~~

General Wire P-MR-B Mini-Rooter Basic Unit with 75' x 3/8" cable and Power Cable Feed The General Wire P-MR-B Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 75' x 3/8" cable (75EM2), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-B Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-B Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable.

General Wire P-MR-C Mini-Rooter Basic Unit with 50' x 1/2" cable and Power Cable Feed

Item #: 455378750
Price: 616.72
Retail price: ~~722.15~~

General Wire P-MR-C Mini-Rooter Basic Unit with 50' x 1/2" cable and Power Cable Feed The General Wire P-MR-C Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 50' x 1/2" cable (50EM3), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-C Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-C Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable.

General Wire P-MR-D Mini-Rooter Basic Unit with 75' x 1/2" cable and Power Cable Feed

Item #: 455378753
Price: 665.74
Retail price: ~~779.55~~

General Wire P-MR-D Mini-Rooter Basic Unit with 75' x 1/2" cable and Power Cable Feed The General Wire P-MR-D Mini-Rooter Includes: The Mini-Rooter Basic Unit Including MR-200 Drum, 1/3 hp Motor with Reverse Switch, 10 ft. Power Cord, Ground Fault Interrupter, Water-Proof Air Foot Switch, Leather Gloves, 75' x 1/2" cable (50EM3), MRCS Cutter Set, and Power Cable Feed. General Wire P-MR-D Mini-Rooter Features: With a 1/3 hp motor, the Mini-Rooter clears lines from roof-top to basement, including kitchen, bath and laundry drains. This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or switch to a different diameter cable--with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet - so you finish quicker. An optional power cable feed gives you better feeding and retracting control. For small drain work, you can order your Mini-Rooter with a "J" Drum or a Dual Drum for handling smaller, more flexible cables. An optional Mini-Rooter dolly lets you roll the machine to and from the job on 8" semi-pneumatic wheels. Some Mini-Rooter safety features: A foot pedal that uses air pressure to start and stop the machine, with no electrical wiring between pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. General Wire P-MR-D Mini-Rooter Specifications: • Weight: 37 lbs. (17 kg) without cable. • Dimensions: 18" deep x 12" wide x 19" high (45 cm x 30 cm x 46 cm). • Drum: Capacity of 75 ft. of 3/8" or 1/2" Flexicore wire rope center cable. Integral distributor tube. Oilite bronze and ball thrust bearings. • Cutter Set: Arrow Head, Boring Gimlet, 2" Side Cutter Blade, 1-1/2" U-Cutter. • Motor: 1/3 hp, with forward-off-reverse switch, spring- loaded mounting for proper belt tension. • Load Speed: 165 rpm. • Belt Guard: High impact plastic. • Power Cable Feed: Drives 1/2" and 3/8" cables. • Foot Pedal: Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor. • Power Cord: 10 ft. 3 wire vinyl covered with molded plug. In-line ground fault circuit interrupter. • Leather Gloves: With reinforced palm for hand protection and proper slippage when guiding cable.

Apple iPod Dock Connector to FireWire Cable - Digital player data cable - Firewi

Item #: 457981767
Price: 15.61

The iPod Dock Connector to FireWire Cable offers 400Mbs throughput for quick transfer of your music and data to iPod. Use a second Dock Connector to FireWire Cable to charge iPod on the go or connect to a second dock.

Monster Cable PowerLine MP PL100-8 - Power cable - IEC 320 EN 60320 C13 - 8 ft

Item #: 458226905
Price: 20.84

The solution is connecting your system with a cable engineered for high-current applications like the Monster PowerLine 100. Advanced, ultra-fine copper stranding maintains maximum current delivery with minimal loss over long lengths to help ensure peak component performance. The 24k gold plug contacts provide maximum corrosion resistance and power transfer. An extra-long 8' cable gives you plenty of flexibility to route your power cord. Even better, the 30� angled FlatProfile Plug stays out of the way of other plugs and outlets and lies flat so you can keep furniture right up against wall.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Prev Next

Home