Surly Pacer Fork
|
SURLY PACER FORK
|
|
Item #: 457360163
Price: 94.00
|
Surly Pacer - CroMoly tubing, semi-sloping crown, brazed construction, powdercoated black
- Clearance for 700c x 32mm tires or 28mm tires with fenders
- Single fender eyelets
- 10mm Brake Bolt to Crown Length
- Fork Rake: 44 mm
- Steerer Tube Length: 300 mm
- Wheel Size: 700c
- Weight: 984 g
- Steerer Tube: 1-1/8" Threadless
|
|
SURLY PACER FRAME DECAL SET
|
|
Item #: 457363798
Price: 14.00
|
Got a little crazy and tore up your stickers? This kit from Surly will get you going again - or just use it to dress up your cube or car.
|
|
SURLY PACER SILVER BULLET FRAME SET
|
|
Item #: 457360225
Price: 410.00
|
SURLY PACER SILVER BULLET FRAME SET
NEW GRAPHICS!!!
TIG-welded double-butted Surly 4130 CroMoly construction.Uses standard-reach and some short-reach brakesDowntube shifter bossesTire clearance for 32mm tires or 28mm with fendersIncludes Constrictor seatpost clampVertical Breeze- In rear dropoutsSingle fender eyelets front and rear, two sets of bottle bosses, and pump peg |
|
SURLY 1X1 FORK
|
|
Item #: 457360158
Price: 68.00
|
The Surly 1x1 Mountain fork - CroMoly tubing, butted blades
- Suspension-corrected for 80mm travrl froks,
- fits wide 2.7" tires with clearance
- FK0003 has ISO disc tabs and removable canti pivots
- Fork Rake: 45 mm
- Steerer Tube Length: 260 mm
- Wheel Size: 26"
- Weight: 1030 g
- Steerer Tube: 1-1/8" Threadless
|
|
SURLY PUGSLEY FORK
|
|
Item #: 457360162
Price: 110.00
|
Surly Pugsley Adventure Fork Cro-moly Pugsley fork is a tapered straight blade unit, spaced at 135mm (between the dropouts) to accommodate a rear hub, and wide enough to allow a 4" tire to fit with ease. It’s offset 17.5mm, to allow wheel interchangeability with the Pugsley frame. Rear international standard disc mounts and removable 120mm-spaced cantilever pivots give you brake options. The Pugsley fork comes with fender eyelets, cable housing guides, 1-1/8” threadless steerer, and black powdercoat. 447mm axle to crown.
- Straight bladed, tapered CroMoly tubing
- Rear hub must be used on this fork instead of the regular front hub.
- Spaced 135mm at dropouts, offset 17.5 to drive side
- Accommodates 26"x4" tire.
- Disc Mount Type: 51mm I.S. Rear
- Fork Rake: 43 mm
- 135mm spacing offset
- Brake Type: Disc,Linear Pull - Canti
- Front Hub Spacing: 135 mm
- Weight: 1140 g
- Steerer Tube: 1-1/8" Threadless
- Material: CroMoly
|
|
SURLY INSTIGATOR FORK
|
|
Item #: 457360160
Price: 100.00
|
Surly Instigator fork - Straight bladed CroMoly TIG-welded tubing
- ISO disc tab and removable canti pivots
- 26" wheel size, suspension-corrected for 100mm travel
- Fork Rake: 43 mm
- Steerer Tube Length: 260 mm
- Brake Type: Disc,Linear Pull - Canti
- Wheel Size: 26"
- Disc Mount Type: 51mm I.S. Front
- Weight: 1420 g
- Steerer Tube: 1-1/8" Threadless
- Axle to Crown Length is 447mm
|
|
SURLY CROSS FORK
|
|
Item #: 457360161
Price: 94.00
|
Surley Cross-Check Fork - 100% CroMoly construction,
- fully brazed crown, single eyelet dropouts, and cantilever bosses
- Clearance for 700c x 45mm knobbies with fenders
- Black powdercoated finish
- Fork Rake: 44 mm
- Steerer Tube Length: 300 mm
- Brake Type: Linear Pull - Canti
- Wheel Size: 700c
- Weight: 1"-966g 11/8"-1026g
|
|
SURLY STEAMROLLER FORK
|
|
Item #: 457360156
Price: 84.00
|
The Surly Steamroller Road fork accepts tires up to 700c x 38mm and is drilled for a standard-reach brake. Features and Information - CroMoly tubing, flat crown, brazed construction
- Accepts tires up to 700c x 38mm, drilled for standard-reach brake
- No eyelets
- Black
- FK0124 and FK3001 have 7mm Brake Bolt to Crown Length
- FK3002 has 9mm Brake Bolt to Crown Length
|
|
SURLY BIG DUMMY FORK
|
|
Item #: 457359921
Price: 104.00
|
The Surly Big Dummy fork is a 1-1/8" x 260mm rigid mountain fork that is light and strong, it would go great on any rigid setup that needs the flexbility of using either disc or canti-lever brakes.
- Steerer Tube Length: 260 mm
- Brake Type: Linear Pull - Canti, Disc
- Disc Mount Type: 51mm I.S. Front
- Front Hub Spacing: 100 mm
- Front Axle Type: 9x1
- Material: CroMo
- Steerer Tube: 1-1/8" Threadless
|
|
SURLY KARATE MONKEY FORK
|
|
Item #: 457360159
Price: 96.00
|
The Surly Karate Monkey Mountain fork The Karate Monkey rigid fork replaces suspension forks designed for use on 29"-wheeled bikes. It features International Standard disc mounts, removable canti pivots, 1-1/8" threadless steerer, tapered straight blades, and a black powdercoat finish. 468mm axle to crown. Rake: 43mm
Steerer: 260mm
Weight: 2.59 lbs. (1.18 kg)
|
|
