Race Face Next Sl Carbon 08
|
RACE FACE NEXT SL CARBON '08
|
|
Item #: 457946576
Price: 120.00
|
The RaceFace Next SL post features an innovative, patent pending head design which offers maximum adjustability while minimizing weight.
- Forged and CNC machined from 6061 aluminum, the seatpost head is incredibly strong and fatigue resistant.
- Patent pending head design is lightweight and distributes loads more efficiently than conventional seatpost head designs.
- Offers unprecendented adjustibility - with infinite tilt adjustment completely independent from the fore/aft adjustment.
- Side clamping rail system distributes loads to the clamp, rather than the bolt, virtually eliminating the possibility of broken bolts.
- The head accomodates 7mm and 8mm rails while providing 35mm of rail support.
- Features a 0.5" rearward offset.
- The seatpost tube is manufactured using our proven next carbon technology.
- The highly tested and engineered carbon tube offers outstanding fatigue and impact strength for a lightweight XC post.
|
|
RACE FACE NEXT XC CARBON RISER '08
|
|
Item #: 457946420
Price: 95.00
|
The Next XC Riser Bar is light, strong, and affordable bar that is manufactured with a leading edge composite materials which allow the bar to reach RaceFace's high strength standards while still coming in at an impressively low weight.
- Daily destructive testing from each production run ensures each bar meets the exacting Standards set by RaceFace
- Highest strength to weight ratio of any carbon bars available today
- Intended use: XC
- 5º rearward sweep, 4º upward rise(low rise bars)
- 9º rearward sweep, 6º upward rise(3/4 rise bar)
- Width: 25”/635mm (25.4), 26”/660mm (31.8), 27"/685mm(3/4 rise)
- RISE: 1.0” (25.4), 1.5” (31.8), .75"(3/4 rise)
- Weight(claimed): 184g (25.4mm), 195g (31.8mm), 200g(3/4 rise)
|
|
RACE FACE NEXT XC SL CARBON RISER '08
|
|
Item #: 457946418
Price: 112.00
|
Designed using Race Face’s optimized carbon technology process, theNext SL Riser bars are manufactured with a leading edge compositeweave. A precise manufacturing process allows the Next SL to reach highstrength requirements while still maintaining a very low weight.
- Reinforced stem anti-crush zone minimizes the possibility of stress risers where the stem meets bar – the area in which most carbon bars fail
- Daily destructive testing from each production run ensures each bar meets the exacting standards set by Race Face engineers
- All SL bars are constructed from a high strength 3K carbon weave
- Intended use: XC
- Low Riser
- Specification: 5º rearward, 4º upward 24” or 610mm width (25.4), 25” or 635mm width (31.8)
- Rise: 1.0” (25.4), 1.5” (31.8)
- Weight(claimed: 145g (25.4mm), 160g (31.8mm)
- ¾ Riser Bar
- Specifications: 9º rearward, 6º upward 27” or 685mm width
- Rise: .75”
- Weight(claimed): 170g
|
|
RACE FACE DEUS HEADSET FORK RACE
|
|
Item #: 457361109
Price: 18.50
|
RaceFace RF Deus headset race, also works with RaceFace Diabolus headsets! |
|
RACE FACE RACE RINGS 5 BOLT
|
|
Item #: 456938548
Price: 15.00
|
Race Face rings were already some of the best rings on the market, and now they've made them even better for 2004. The best part? The low, low price that makes you smile! They haven't forgotten about you 5-bolt crankarm owners, either - these are the same rings as their top end 4-arm cross-country chainrings, just with a 5-bolt mounting pattern. Each ring is CNC machined in Canada from 7075-T6 aluminum, one of the strongest alloys available today (inner rings are steel for durability). Outer rings are made from 4mm thick plate, while the middle is 5mm thick for unsurpassed durability. The rings feature Race Face's patented SHIFT technology - hard-wearing stainless steel SHIFT chips for fast, predictable upshifts. All these features result in a ring setup that's 15% lighter than last year's lineup, while retaining their incredible stiffness. | Construction: | 7075-T6 aluminum, Steel inner | | BCD: | 58, 74, 94, or 110mm available | | Compatibility: | optimized for 9 speed drivetrains | |
|
RACE FACE RACE RINGS 4 BOLT
|
|
Item #: 456938547
Price: 13.98
|
Race Face rings were already some of the best rings on the market, and now they've made them even better for 2004. The best part? The low, low price that makes you smile! Each ring is CNC machined in Canada from 7075-T6 aluminum, one of the strongest alloys available today (inner ring is steel for durability). Outer rings are made from 4mm thick plate, while the middle is 5mm thick for unsurpassed durability. The rings feature Race Face's patented SHIFT technology - hard-wearing stainless steel SHIFT chips for fast, predictable upshifts. All these features result in a ring setup that's 15% lighter than last year's lineup, while retaining their incredible stiffness.
22t inner is steel. | Construction: | 7075-T6 aluminum (steel inner) | | BCD: | 104mm (middle, outer) 64mm (inner), 4 arm | | Compatibility: | optimized for 9 speed drivetrains | |
|
YETI 575 CARBON RACE 20 BIKE '08
|
|
Item #: 459722054
Price: 4399.00
Retail price: 4199.00
|
The 2008 Yeti 575 Carbon Race 20 features a carbon fiber swingarm that helps to provide smooth handling with 140m of front and rear travel, allowing you ride the lines you want to take up or down the mountain. The 575's construction helps tomake it an All Mountain bike that climbs with the cross-country bikesand descends with the downhill bikes.
- Yeti Pure Tubeset and Aluminum Frame with 5.75" rear travel
- Carbon Fiber Swingarm
- Fox FLOAT 36 RC2 160mm travel fork
- Fox DHX Air 5.0 rear shock
- Cane Creek S-3 Headset
- Shimano XT front and Shadow rear derailleurs
- Shimano XT 44-32-22 crankset
- Shimano XT 11-34 cassette
- DT 370 20mm thru axle Hubs laced to DT 540 rims with Maxxis Minion 2.35 ST tires
- Shimano XT Disc brakes
- Easton Monkey Lite handlebar on a Thomson X4 stem
- Yeti/SDG Ti FLy saddle on a Thomson X4 seatpost
- Enduro max sealed bearings
- Fits 34.9mm clamp size front derailleurs
- 73mm shell bottom bracket with 113mm spindle
- 30.9mm seatpost
- Rear Shock 2" stroke, 7.875" eye to eye
- 160-200mm rotor
- Maximum tire size 2.5"
NOTE: All measurements in inches. 140mm Fork ride height 511.0mm.
NOTE: Image is for display purposes only, components are as listed above
|
|
YETI 575 CARBON RACE BIKE '08
|
|
Item #: 459722053
Price: 3799.00
Retail price: 3649.00
|
The2008 Yeti 575 Carbon Race uses a lightweight carbon swingarm that helps to provide smooth out the trail with 140m of front and rear travel, allowing you to ride the lineyouwant to take up or down the mountain. The 575's construction helps tomake it an All Mountain bike that climbs with the cross-country bikesand descends with the downhill bikes.
- Yeti Pure Tubeset and Aluminum Frame with 5.75" rear travel
- Carbon Fiber Swingarm
- Fox FLOAT 140 RLC 140mm travel fork
- Fox RP23 rear shock
- Cane Creek S-3 Headset
- Shimano XT front and Shadow rear derailleurs
- Shimano XT 44-32-22 carnkset
- Shmano XT 11-34 cassette
- DT 370 QR Hubs laced to DT 540 rims with Maxxis Minion 2.35 ST tires
- Shimano XT Disc brakes
- Easton Monkey Lite handlebar on a Thomson X4 stem
- Yeti/SDG Ti FLy saddle on a Thomson X4 seatpost
- Enduro max sealed bearings
- Fits 34.9mm clamp size front derailleurs
- 73mm shell bottom bracket with 113mm spindle
- 30.9mm seatpost
- Rear Shock 2" stroke, 7.875" eye to eye
- 160-200mm rotor
- Maximum tire size 2.5"
NOTE: All measurements in inches. 140mm Fork ride height 511.0mm.
NOTE: Image is for display purposes only, components are as listed above
Allbikes come with JenonUSA's complementary Free Pro Build Service, pleaseallow 3 business days for your bike to be assembled, inspected andpacked before shipping. |
|
SUPERCROSS PRO CARBON RACE SADDLE
|
|
Item #: 457363171
Price: 25.50
|
The Supercross Pro Carbon Saddles is a quality saddle at a great value with CroMoly rails for added strength and durability.
- Clamp Style: Standard Rails
- Rail: CroMoly
|
|
YETI AS-R CARBON RACE BIKE '08
|
|
Item #: 459722047
Price: 4699.00
Retail price: 4549.00
|
The Yeti's ASR Carbon line of bikes are quick and agile cross countrybike, that are both strong and lightweight. They features a full carbonframe that providesexcellent response when you need to get out of the saddle and pedal.TheYeti ASR Carbon line features an integrated seatpost which helps toincrease the stiffness of the frame while helping to make each pedalstroke more efficient.
The ASR Carbon Race is a fast bike the features a killer build with a mix of Shimano XT and XTR components, and a Easton Monkey Lite Bar mounted to a Thomson X4 stem.
- Full Carbon Frameset with integrated seat post
- Enduro max sealed bearings
- 3.89" of rear wheel travel
- 2.35" max tire size
- 160mm max rotor
- Rear shock: 1.5" stroke, 6.5" eye to eye
- Fox F100 RLC 100 mm travel fork
- Fox RP23 rear shock
- Cane Creek S-3 headset
- Shimano XT 44-32-22 crankset
- Shimano XT front and XTR rear(shadow) derailleurs with XT shifters
- Shimano XT 11-34 cassette
- DT 370 hubs laced to DT 455 rims
- Maxxis Crossmark 2.1 tires
- Shimano XT hydraulic disc brakes
- Easton Monkey Lite handle bar
- Thomson X4 stem
- Yeti/SDG Ti Fly saddle
- Frame Weight: 4.25 lbs(MD)
Yeti ASR Geometry Chart
|
| SM
| MD
| LG
| Seat Tube Length
| 27.6"
| 28.3"
| 30.7"
| Top Tube Length
| 22.4"
| 23.4"
| 24.4"
| Head Tube Angle
| 69
| 69
| 69
| Seat Tube Angle
| 73
| 73
| 73
| Chainstay Length
| 16.9"
| 16.9"
| 16.9
| | Wheelbase | 42.5"
| 43.5"
| 44.6"
| BB Drop
| 12.75"
| 12.75"
| 12.75"
| | Standover | 27.4"
| 27.4"
| 27.7"
| Head Tube Length
| 4"
| 4.5"
| 5.25"
| NOTE: All measurements in inches.
100mm Fork, ride height 471.0 mm
NOTE: Image is for display purposes only, components are as listed above
|
|
