Race Face Evolve Dh Bottom Bracket
|
RACE FACE EVOLVE XC BOTTOM BRACKET
|
|
Item #: 456937432
Price: 54.99
|
| #03103 The Evolve XC BB uses the lighter M15 spindle and in intended for cross country riding. All Evolve Series BB's feature slide on cartridge bearings with full ball construction. These are lighter, stiffer and feature a higher load carrying capacity than the typical one-piece cartridge bearings. And with twice as many balls per bearing as the competitors, these bottom brackets spin smoother and last longer. To further enhance performance Race Face uses their own proprietary grease formula. This increases the bearing life up to four times. | Material: | CNC machined, heat treated, hollow chromoly, shot peened, M15 spindle | | Weight: | 230 grams | |
Compatibility: | ISIS spline for Race Face or Truvativ cranks | |
Bearings: | Single row, double sealed cartridge bearings, with two bearings on the drive side. | Adjustable: | Cups fit 68 and 73mm shells and allows adjustability of the chain line |
|
|
RACE FACE EVOLVE FR BOTTOM BRACKET
|
|
Item #: 456937433
Price: 43.00
|
| #03105 The Evolve FR BB uses the stronger M12 spindle and is intended for riders that want the strength of a DH BB but want to use a triple chain ring setup instead of a chainguide. All Evolve Series BB's feature slide on cartridge bearings with full ball construction. These are lighter, stiffer and feature a higher load carrying capacity than the typical one-piece cartridge bearings. And with twice as many balls per bearing as the competitors, these bottom brackets spin smoother and last longer. To further enhance performance Race Face uses their own proprietary grease formula. This increases the bearing life up to four times. | Material: | CNC machined, heat treated, hollow chromoly, shot peened, M12 spindle | | Weight: | 280 grams | |
Compatibility: | ISIS spline for Race Face or Truvativ cranks | |
Bearings: | Single row, double sealed cartridge bearings, with two bearings on the drive side. | Adjustable: | Cups fit 68 and 73mm shells and allows adjustability of the chain line |
|
|
RACE FACE EVOLVE DH BOTTOM BRACKET
|
|
Item #: 456937434
Price: 53.99
|
| #03107 The Evolve DH BB uses the stronger M12 spindle and is intended for single chainring DH bikes. It has a longer 118 mm spindle with an offset drive side cup for use with chain guides. All Evolve Series BB's feature slide on cartridge bearings with full ball construction. These are lighter, stiffer and feature a higher load carrying capacity than the typical one-piece cartridge bearings. And with twice as many balls per bearing as the competitors, these bottom brackets spin smoother and last longer. To further enhance performance Race Face uses their own proprietary grease formula. This increases the bearing life up to four times. | Material: | CNC machined, heat treated, hollow chromoly, shot peened, M12 spindle | | Weight: | 290 grams | |
Compatibility: | ISIS spline for Race Face or Truvativ cranks. Not compatible with a triple chainring setup | |
Bearings: | Single row, double sealed cartridge bearings, with two bearings on the drive side. | Adjustable: | Cups fit 68 and 73mm shells and allows adjustability of the chain line |
|
|
RACE FACE EVOLVE DH
|
|
Item #: 460731256
Price: 49.60
|
RaceFace Evolve DH Seatpost is a heavy duty and stable seatpost that is built to withstand the stresses of the downhill lifestyle.
- Head is machined from AL-6061
- Post is forged from AL-2014 and shot peened for durability
- Weight: 275 g
- Length: 350 mm
- Material: AL-2014
- Seatpost Diameter: 27.2 mm
- Offset: 18 mm
- Minimum Height: 60 mm
- Max Height: 275 mm
|
|
RACE FACE EVOLVE DH CRANKSETS '08
|
|
Item #: 457946273
Price: 129.00
|
Evolve is for aggressive riders that don't want to spend a fortune. The Evolve DH outboard bearing crankset serves up performance similar to the top-end Diabolus lineup at a lower price point.
- Reinforced pedal interface
- Includes X-Type external bottom bracket cups
- 6066-T6 aluminum arms with 7050 aluminum rings (or a bashguard on select models)
- 1207 grams
- Fits 68 or 73mm BB shells, via included spacers
|
|
RACE FACE EVOLVE XC STEM '08
|
|
Item #: 457946643
Price: 38.00
|
The perfect complement to your other Evolve gear, the XC stem is designed for cross-country riders who want performance at a reasonable price. It's forged from 6061 aluminum for fatigue resistance, and uses the same 4 bolt clamp with interlocking, stress-riser eliminating U-shaped clamp for compatibility with carbon bars. | Weight: | 170 grams (110mm, 25.4) | | Material: | Forged 6061 Aluminum | | Compatibility: | 1 1/8" threadless steerers |
|
|
RACE FACE EVOLVE AM STEMS
|
|
Item #: 457364244
Price: 45.37
|
RaceFace Evolve AM Stems are strong and stable stems that are built to take the stresses of all mountain riding.
- Bar Clamp Diameter: 31.8 mm
- Stem Angle: 82, 98 deg
- Stem Length: 50 mm to 110 mm
- Steerer Tube: 1-1/8" Threadless
|
|
RACE FACE EVOLVE XC FLAT BAR '08
|
|
Item #: 457946425
Price: 23.00
|
The Evolve XC Flat bar is designed to be strong and durable while still keeping your bike in the welterweight category.
- Manufactured from cold drawn, seamless Air Alloy material
- Shot peened for increased fatigue life
- Gradual external swaging & internal taper give increased strength & durability without adding weight
- The XC Flat Bar is slightly narrower than the Evolve XC Riser Bar (23”) with a significantly reduced weight
- Intended use: XC
- Dimensions: 23.6” or 600mm width, 5º rearward sweep
- Rise: 0
- Weight(claimed): 175g (25.4mm), 185g (31.8mm)
|
|
RACE FACE EVOLVE LOW RISE XC BAR '08
|
|
Item #: 457946426
Price: 30.00
Retail price: 45.00
|
The Evolve XC Low Riser bar is designed to be strong and durable while still keeping your bike in the welterweight category.
- Manufactured from cold drawn, seamless Air Alloy material
- Shot peened for increased fatigue life
- Gradual external swaging & internal taper give increased strength & durability without adding weight
- Intended Use: XC
- Dimensions: 26”or 660mm width, 5º rearward, 4º upward
- Rise: 1.0”
- Weight(claimed): 245g (25.4mm), 260g (31.8mm)
|
|
RACE FACE EVOLVE DH X-TYPE
|
|
Item #: 457637434
Price: 174.00
|
The Evolve DH is a sturdy crankset with outboard bearings and a beefy bashguard to protect the middle and inner ring. The arms are near-net forged and fully CNC machined from 7050 aluminum.
- Includes integrated spindle and external BB cups, which fit 68 or 73mm BB shells
- I-LOCK reinforced pedal interface for durability
- Designed for use with 9 speed drivetrains
|
|
