Race Face Diabolus X Type Crankset W Bb
|
RACE FACE DIABOLUS X-TYPE BB '08
|
|
Item #: 457946218
Price: 38.00
|
Replacement set of outboard bearing cups for use with Race Face X-Type cranksets. The Diabolus model is a little heavier, but offers a longer threaded section for more engagement with the frame.
- Includes left and right cup
- Packed with premium Phil Wood grease
|
|
RACE FACE X-TYPE DEUS CRANKSET '07
|
|
Item #: 457359506
Price: 210.00
Retail price: 280.00
|
X-Type. It's a whole new crank and bottom bracket design from Race Face. By moving the bearings outside of the bottom bracket shell, some of the problems of traditional bottom brackets can be addressed, like stiffness, durability of the crank/BB junction, and bearing quality. The X-Type system puts the bearings into sealed cartridge units placed outboard of the bottom bracket. The spindle (part of the left crankarm) is then passed through the shell and secured with a bolt behind the right side crank. What are the benefits of the X-Type system to you, the rider? - Superb stiffness and durability that you don't get with square taper cranks or competing spline designs.
- Adjustable chainline - 3mm of left/right adjustment helps you fine-tune your chainline for perfect shifting.
- New 10-spline interface eliminates creaking and cranks the come loose. Since the system does not depend on a press fit, you can remove your cranks for service any time you like, without worry that the interface will "stretch".
- More and larger bearings can be used. That means more contact surface so no more premature wear.
- No special tools are needed for installation or removal of the cranks.
- No left side crank bolt (plus other enhancements) yields a crank/BB combo that is lighter than before.
Deus is the lightest aluminum crank ever made by Race Face. They're "near net" forged and fully machined with an aggressive I-Beam profile for improved stiffness and strength. It's X-Type spindle is a superlight, butted, heat-treated NiCrMo design. Please note: this crankset is only compatible with X-Type bottom bracket cups from Race Face. Installation wrench sold separately | Material: | 7050 aluminum | | Weight: | 830 grams, complete (both arms, spindle, chainrings, bolts, and BB) | | Compatibility: | X-Type | |
|
RACE FACE EVOLVE XC X-TYPE CRANKSET '08
|
|
Item #: 457946271
Price: 139.00
Retail price: 179.00
|
Everything about Evolve scream high-end: forged in logos, nice machining, etc - except the price! Outboard bearing design with big integrated chromoly spindle for stiffness. Includes BB bearing cups that work on 68 or 73mm shells via the included spacers.
- 925 grams
- Manufactured from 6066-T6 aluminum, this material is over 30% stronger than 6061
- Evolve chainrings are built from 7050 aluminum for increased stiffness and impact strength.
|
|
RACE FACE DIABOLUS JACKET
|
|
Item #: 459722656
Price: 200.00
|
RaceFace Diabolus Jacket The RaceFace Diabolus Jacket features the same high performance material as the Aquanot Jacket but in a more gernerous cut, allowing it to fit comfortably over body armour. Reinforced Dual Ply shoulders increase the durability of the garment, making it the ideal jacket for Freeriding. - Constructed using Storm-Ultra lite, a 3-ply laminate, waterproof and breathable fabric
- Waterproof zippers used throughout
- Reflective logos and piping for increased visibility
- 2-way underarm pit zips
| Color | Dark Green | | Fit | Men''s | | Size | Large | |
|
RACE FACE DIABOLUS CRANK ARM SET W/ BB
|
|
Item #: 457359437
Price: 239.25
|
| RaceFace Diabolus Armsets | | No Chainrings | | Color | Black | | Crank/FD Type | Mountain | | BB Shell Width | 83 mm | | Crank Intended Use | Mountain | | Intended Use | Mountain | | BB Thread Type | English | | Spindle Interface Type | RaceFace X-Type | | Spindle Length | 0 mm | | Pedal Spindle Thread | 9/16" | |
|
RACE FACE DIABOLUS GLOVE '08
|
|
Item #: 459722396
Price: 37.00
|
Race Face Diabolus Gloves feature stretch air mesh on top of fingers and back of hand and synthetic leather palm to keep you hands cool and comfortable on long rides.
- Kevlar knuckle for impact protection
- Pittards Linebackers leather on fingers
- Molded neoprene wrist cuff
- Stretch air mesh on top of fingers and back of hand
- Synthetic leather palm
- Perforated fingers for airflow and moisture management
|
|
RACE FACE DIABOLUS CHAINGUIDE '08
|
|
Item #: 457946256
Price: 99.00
|
Race Face finally enters the chainguide market! The Diabolus guide makes installation simple and works with a large variety of frames and suspension systems. Designed for bikes with 1-ring cranks.
- 6061 aluminum "boomerang" portion
- Impact-molded upper portion encloses the chain, helping retention and reducing chain slap at high speed
- Compatible with 68, 73, 83, and 100mm BB shells
- Includes a Race Face aluminum bashguard too!
Available in both ISCG and ISCG '05 mounting patterns for bikes with integrated tabs for mounting a chainguide. Check with your bike or frame supplier if you're unsure about which mounting pattern you have.
|
|
RACE FACE DIABOLUS RISER BAR '08
|
|
Item #: 457946424
Price: 54.00
Retail price: 69.00
|
The Race Face Diabolus is a strong handlebar that was designed specifically for the abusive DH and Freerider lifestyle. The Diabolus is the bar ridden by Darren Berrecloth and Paul Basagoitia, two of the best free riders on the pro scene today.
- Manufactured from cold drawn, seamless Air Alloy material.
- Internal taper increases strength & durability without adding weight.
- Intended use: DH/FR
- Dimensions: 28” or 710 mm width, 9º rearward, 4º upward
- Rise: 1.5”
- Weights(claimed): 350g (25.4mm), 385g (31.8mm)
|
|
RACE FACE DIABOLUS SEATPOST '08
|
|
Item #: 457946578
Price: 77.00
|
Diabolus is heavy-duty gear from Race Face - built to stand up to aggressive use like freeriding or downhill racing. The Diabolus post uses a twin rear clamp to effectively disperse high impact loads, while still retaining easy and straightforward adjustment of tilt and fore/aft settings.
- Head CNC machined from 6061 aluminum for strength
- 3/4" offset to the rear of the bike
- 7050 Aluminum shaft is straightwall tubing - so it can be clamped at any height
- Bead blasting finish further improves fatigue life
- claimed 345 grams (27.2mm size)
|
|
RACE FACE DIABOLUS D2 STEM '08
|
|
Item #: 457364296
Price: 77.00
|
The new Diabolus 2 comes in a variety of lengths and clamp sizes, including the long-awaited and often-requested 31.8mm bar, OnePointFive head tube combo! Machined from 6061-T6 aluminum, with a 4 bolt face plate to securely hold your bar, plus an interlocking U-Shaped clamp that reduces stress on the handlebar.
- Previous winner of BIKE Magazine's Editor's Choice award
- Our number one recommendation for aggressive riders
- Designed to stand up to heavy-duty riding, freeride, DH racing, etc
- Weights:
|
|
