Race Face Deus Xc Seatpost
|
RACE FACE DEUS XC SEATPOST '08
|
|
Item #: 457946577
Price: 65.00
|
The RaceFace Deus xc post features an innovative, patent pending head design which offers maximum adjustability while minimizing weight.
- Forged and CNC machined from 6061 aluminum, the seatpost head is incredibly strong and fatigue resistant.
- Patent pending head design is lightweight and distributes loads more efficiently than conventional seatpost head designs.
- Offers unprecedented adjustability - with infinite tilt adjustment completely independent from the fore/aft adjustment.
- Side clamping rail system distributes loads to the clamp, rather than the bolt, virtually eliminating the possibility of broken bolts.
- The head accommodates 7mm and 8mm rails while providing 35mm of rail support.
- Features a 0.5" rearward offset.
- The seatpost tube is manufactured from 7050 heat treated aluminum for the optimal strength to weight ratio.
- Race Face's triple butting process maintains strength in critical areas while reducing overall weight.
- The tube is anodized and shot peened for increased fatigue life.
|
|
RACE FACE DEUS HEADSET FORK RACE
|
|
Item #: 457361109
Price: 18.50
|
RaceFace RF Deus headset race, also works with RaceFace Diabolus headsets! |
|
RACE FACE DEUS XC CRANKSET '08
|
|
Item #: 457946268
Price: 219.00
|
Deus - Race Face's lightest aluminum offering for XC riders and racers. Designed with a careful eye on the gram scale, while still retaining the stiffness that today's racer demands. These are built in Race Face's British Columbia manufacturing facility with aggressive "I-Beam" profiling for improved strength.
- Fully CNC machined
- Outboard-bearing design with superlight, butted, heat-treated Chromoly integrated spindle
- Fits both 68 and 73mm shells via included spacers
- Includes outboard bearing cups (bottom bracket)
- Claimed 815g
|
|
RACE FACE DEUS SS CRANKSET '08
|
|
Item #: 457946269
Price: 240.00
|
Take the proven Deus crank, but trick it out with a single ring and bashguard instead of the normal triple ring setup.That's the Deus SS crankset for singlespeeders.
Designed with a careful eye on the gram scale, while still retainingthe stiffness that today's racer demands. These are built in RaceFace's British Columbia manufacturing facility with aggressive "I-Beam"profiling for improved strength.
- Fully CNC machined
- Outboard-bearing design with superlight, butted, heat-treated Chromoly integrated spindle
- Fits both 68 and 73mm shells via included spacers
- Includes outboard bearing cups (bottom bracket)
- Includes Race Face bashguard
|
|
RACE FACE DEUS XC FLAT BAR '08
|
|
Item #: 457946421
Price: 43.00
|
Deus is the lightest aluminum gear manufactured by Race Face - and the flat bar is no exception. Designed with an eye on the gram scale for today's XC rider and racer.
- manufactured from Cold-drawn, seamless air alloy
- shot-peened finish for additional fatigue life
- Internally butted to create an optimum strength-to-weight ratio
These feature a 5 degree bend, are 23" wide, and weigh in at a claimed 145g (25.4mm version)
|
|
RACE FACE DEUS XC STEM '05
|
|
Item #: 457364336
Price: 59.95
Retail price: 80.00
|
Brand new for 2005, the Deus XC stem has been dramaticallyre-designed to minimize weight. It's constructed from 7050 aluminum, with greatfatigue resistance. The four bolt clamp holds the bar securely and featuresa U-shaped interlocking faceplate to minimize stress risers (especially importantwith carbon handlebars). The steerer clamp uses opposing bolts to generate clampingpower while reducing stress on the steerer. The logos are even machined-in! | Weight: | 125 grams (110mm, 25.4) | | Material: | Forged 7050 Aluminum | | Compatibility: | 1 1/8" threadless steerers | |
|
RACE FACE DEUS XC RISER BAR '08
|
|
Item #: 457946422
Price: 54.00
|
The Race Face Deus XC Riser bar is strong yet lightweight making it a great choice for XC who are looking for riser bar. The Deus is manufactured from cold drawn, seamless Air Alloy aluminum and shot peened for increased fatigue life it is then butted to create an optimal strength to weight ratio resulting in one tough but light bar.
|
|
RACE FACE DEUS XC GLOVE 07'
|
|
Item #: 457360378
Price: 37.53
|
The Race Face Deus XC is a 'Slip On' glove that provides total freedom of movement and unsurpassed breathability. It is a full featured, high-end technical glove, perfect for those warm weather rides. This glove has been designed with strategic seam placement it is carefully patterned so that there are no seamsacross the main flexation areas, giving you unlimited mobility andcomfort.
- Stretch air mesh on the back of all the fingers and hand to help direct air into the glove
- Perforated fingers help add increased airflow and moisture management
- Open cell foam creates 2mm of Padding in key areas on the palm for added comfort and protection
Wrap a tape measure around your palm at the widest point (usually theknuckles) and make a light fist. Take that measurement and refer to thechart below to find your size.
Race Face Gloves Sizing Chart
Wrap a tape measure around your palm at the widest point (usually the knuckles) and make a light fist. Take that measurement and refer to the chart below to find your size.
| S
| M
| L
| XL
| 7-7.5"
| 8-8.5"
| 9-9.5"
| 10-10.5"
|
|
|
RACE FACE DEUS XC STEM '08
|
|
Item #: 457946642
Price: 62.00
|
The Deus line was designed by Race Face engineers with a careful eye on the gram scale. Perfect for cross-country riders and racers.
For '08 they've done a re-design, further reducing weight, while keeping the same performance features that made this one a winner.
- Forged 7050 aluminum
- 4-bolt bar clamp for security - with interlocking U-shaped faceplate to eliminate stress risers - great for users of lightweight carbon bars
- All aluminum hardware is used to keep weight at an absolute minimum
- Reversible, so it can be + or - 6 degree rise
- Claimed 135g (110mm extension w/25.4mm clamp)
|
|
RACE FACE X-TYPE DEUS CRANKSET '07
|
|
Item #: 457359506
Price: 210.00
Retail price: 280.00
|
X-Type. It's a whole new crank and bottom bracket design from Race Face. By moving the bearings outside of the bottom bracket shell, some of the problems of traditional bottom brackets can be addressed, like stiffness, durability of the crank/BB junction, and bearing quality. The X-Type system puts the bearings into sealed cartridge units placed outboard of the bottom bracket. The spindle (part of the left crankarm) is then passed through the shell and secured with a bolt behind the right side crank. What are the benefits of the X-Type system to you, the rider? - Superb stiffness and durability that you don't get with square taper cranks or competing spline designs.
- Adjustable chainline - 3mm of left/right adjustment helps you fine-tune your chainline for perfect shifting.
- New 10-spline interface eliminates creaking and cranks the come loose. Since the system does not depend on a press fit, you can remove your cranks for service any time you like, without worry that the interface will "stretch".
- More and larger bearings can be used. That means more contact surface so no more premature wear.
- No special tools are needed for installation or removal of the cranks.
- No left side crank bolt (plus other enhancements) yields a crank/BB combo that is lighter than before.
Deus is the lightest aluminum crank ever made by Race Face. They're "near net" forged and fully machined with an aggressive I-Beam profile for improved stiffness and strength. It's X-Type spindle is a superlight, butted, heat-treated NiCrMo design. Please note: this crankset is only compatible with X-Type bottom bracket cups from Race Face. Installation wrench sold separately | Material: | 7050 aluminum | | Weight: | 830 grams, complete (both arms, spindle, chainrings, bolts, and BB) | | Compatibility: | X-Type | |
|
