E 13 Srs Chainguide
|
E-13 SRS CHAINGUIDE
|
|
Item #: 456938513
Price: 149.95
|
The E-13 SRS Chain Retention System is compatible with all chainstay configurations. - Compatible with ISCG (International Standard Chain Guide) tabbed frames or with bottom brackets that use a lip on the fixed cup
- 13mm thick Makrolon thermoplastic bashguard is tough, light and won't snag
- Compatible with all chainstay configurations
|
|
FSA GRAVITY CHAINGUIDE
|
|
Item #: 456938407
Price: 120.00
|
FSA Gravity Chain Retention Systems are designed for extreme use in park, street, freeride or downhill applications. - AL7075/T6 boomerang with hard ano finish and stainless steel hardware. 6mm lower and 4mm upper
- Injection molded plastic upper guide and lower roller. Lower roller is also Kevlar reinforced with Teflon additives
- Replaceable sealed cartridge bearings
- Adjustable upper guide plate handles chain rise on long travel bikes
- Compatible with 68, 73, 83 and 100mm BB shells
- Compatible with FSA MegaExo and other external BB systems, ISIS, etc.
- Includes FSA polycarbonate bashring
- Bolt Pattern: 4-Bolt
- Chainring BCD: 104 mm
- Max Tooth: 32 or 34 teeth
|
|
FSA GRAVITY ISCG CHAINGUIDE 05'
|
|
Item #: 457637401
Price: 120.00
|
The FSA Gravity Chain Retention System was designed for extreme use in park, street, FR or DH applications
- AL7075/T6 boomerang with hard ano finish and stainless steel hardware. 6mm lower and 4mm upper
- Injection molded plastic upper guide and lower roller. Lower roller is also Kevlar reinforced with Teflon additives
- Replaceable sealed cartridge bearings
- Adjustable upper guide plate handles chain rise on long travel bikes
- Compatible with 68, 73, 83 and 100mm BB shells
- Compatible with FSA MegaExo and other external BB systems, ISIS, etc.
- Includes FSA polycarbonate bashring
- Bolt Pattern: 4-Bolt
- Chainring BCD: 104 mm
- Max Tooth: 32, 34-36 teeth
|
|
RACE FACE DIABOLUS CHAINGUIDE '08
|
|
Item #: 457946256
Price: 99.00
|
Race Face finally enters the chainguide market! The Diabolus guide makes installation simple and works with a large variety of frames and suspension systems. Designed for bikes with 1-ring cranks.
- 6061 aluminum "boomerang" portion
- Impact-molded upper portion encloses the chain, helping retention and reducing chain slap at high speed
- Compatible with 68, 73, 83, and 100mm BB shells
- Includes a Race Face aluminum bashguard too!
Available in both ISCG and ISCG '05 mounting patterns for bikes with integrated tabs for mounting a chainguide. Check with your bike or frame supplier if you're unsure about which mounting pattern you have.
|
|
